Tables
This piece represents a combination of fabric and sand-casting. The pedestal of the table
was cast in a fabric mold, while the table top was cast in stages against a flat piece of
formica. Both white and gray cement, and yellow iron oxide were used to produce the observed colors.
The table stands approximately 30 inches tall.
All the tables shown on this page have a nominal diameter of 15" (thickness is approximately 2").
Prices for tables vary from roughly $150 to $250, depending on the complexity of the design and the colors used.
|
Here are a few table tops that don't have embedded elements, but rather are poured using
different colors mixed together.
|
|
... a couple of tables side by side...
|
...a table top with embedded elements (white concrete circles that were fixed to the formica prior to pouring concrete). |
